Shared car washing machine control system
| The self-service car washing machine adopts a dual digital display main control module. On the basis of mastering the core technology, it adopts high-end imported microprocessor chips as control. | |
| The core part of the circuit, combined with more than ten years of experience in single-chip microcomputer development, the entire control circuit design layout is reasonable, with strong anti-interference ability, reliable quality and stable operating performance. Operating environment | temperature -2050, humidity 85, no condensation. |
|---|---|
Shared water-saving and energy-saving car wash control motherboard
The self-service car wash machine adopts a dual digital display main control module. On the basis of mastering the core technology, it uses high-end imported microprocessor chips as control.
The core part of the circuit, combined with more than ten years of single-chip microcomputer development experience, the entire control circuit design layout is reasonable, with strong anti-interference ability, reliable quality, and stable operating performance. Use environment: temperature -2050, humidity 85, no condensation.
Main functions: p>
; bsp;
1. Four output channels (the number can be selected according to your needs)
2. Billing mode by time or flow meter
3. Both pre-deduction and real-time deduction can be used for consumption
4. Coin, Swipe card, (ozone, inflation, vacuuming and other functions optional)
5. Water level switch
6. You can set the automatic clearing time (1---30 minutes)
7. You can set the start amount
8. Pause function
9. You can pick up the phone at the airport.
10. Scheduled start and stop
11. You can set the total consumption time
12. You can set the minimum consumption amount
Why Kilandu for turnkey PCBA and PCB
Turnkey, one factory
Gerber and BOM in, tested boards out: component sourcing, SMT, DIP, box-build and functional test under one roof in Shenzhen.
Production capacity
Line count, placement equipment and monthly capacity are documented on the factory capabilities page.
Quality system
Certificates, inspection stages and lot traceability are documented on the quality assurance page.
Markets and lead time
We supply OEM customers across Europe, Russia and the Americas; typical turnkey lead time is 2 to 5 weeks, depending on BOM complexity and component availability.
- Previous：Spectrometer equipment motherboard
Frequently asked questions
What exactly does Kilandu deliver for a custom PCBA project?
A turnkey service: we source the full bill of materials, fabricate the PCB, run SMT and DIP assembly, and finish with AOI, inspection and functional testing, so you receive tested, ready-to-install boards from one factory.
Which quality standards is the factory certified for?
Production follows IPC-A-610 Class 2/3 workmanship under a certified quality system, with RoHS and REACH compliant processes. The certificates and what each one covers are listed on the quality assurance page.
Which markets do you serve and how fast can you deliver?
We supply OEM customers across Europe, Russia and the Americas from our factory in Shenzhen, China, with typical turnkey lead times of 2 to 5 weeks depending on BOM complexity and volume.
