PCBA DIP plug-in processing
| DIP (Dual In-line Package) in PCBA (Printed Circuit Board Assembly) is a common packaging method for electronic components. |
Preparation work: including preparing the materials and tools required for circuit boards, components, sockets, etc.
BOM verification and process arrangement: verify the material model and specifications according to the BOM (bill of materials), arrange the process, and assign components to each work station.
Plug-in: insert the DIP packaged components into the corresponding sockets of the circuit board according to the circuit design requirements.
Soldering: electrically connect the pins of the components to the pads on the circuit board through wave soldering, manual soldering and other welding methods.
Inspection and testing: inspect the soldered circuit board to ensure that the components are correctly installed and there are no problems such as cold soldering and short circuit, and then perform functional testing to verify whether the performance of the circuit board meets the design requirements.
Maintenance and debugging: If problems are found during the inspection or testing process, the circuit board needs to be repaired or debugged to ensure product quality.
Cleaning and drying: Clean the soldered circuit board to remove the flux and other residues on the surface, and then dry it for subsequent processes.
Why Kilandu for turnkey PCBA and PCB
Turnkey, one factory
Gerber and BOM in, tested boards out: component sourcing, SMT, DIP, box-build and functional test under one roof in Shenzhen.
Production capacity
Line count, placement equipment and monthly capacity are documented on the factory capabilities page.
Quality system
Certificates, inspection stages and lot traceability are documented on the quality assurance page.
Markets and lead time
We supply OEM customers across Europe, Russia and the Americas; typical turnkey lead time is 2 to 5 weeks, depending on BOM complexity and component availability.
- Next：PCBA DIP processing
Frequently asked questions
What exactly does Kilandu deliver for a custom PCBA project?
A turnkey service: we source the full bill of materials, fabricate the PCB, run SMT and DIP assembly, and finish with AOI, inspection and functional testing, so you receive tested, ready-to-install boards from one factory.
Which quality standards is the factory certified for?
Production follows IPC-A-610 Class 2/3 workmanship under a certified quality system, with RoHS and REACH compliant processes. The certificates and what each one covers are listed on the quality assurance page.
Which markets do you serve and how fast can you deliver?
We supply OEM customers across Europe, Russia and the Americas from our factory in Shenzhen, China, with typical turnkey lead times of 2 to 5 weeks depending on BOM complexity and volume.
